4 Permanent settings in programming mode
Display brightness
Restore factory settings
34
T Touch 'Save'.
'Gespeichert'
'Sprachauswahl'
T Touch
'Zurück'
start screen again.
In the programme item
display brightness (as a percentage).
Precondition: The start screen is displayed.
T Touch ' P '.
'Maintenance status'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Switch off after'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Display'
T Now move your finger to the left or right to change the set-
ting.
T Touch 'Save'.
'Saved'
appears briefly on the display.
'Display'
T Touch
'Back'
screen again.
In the programme item
machine can be reset to its factory setting: All user settings (apart
from the 'water hardness') are reset to factory settings. Your GIGA
then switches off.
Precondition: The start screen is displayed.
T Touch ' P '.
'Maintenance status'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Switch off after'
T Turn the Rotary Switch until
the centre.
appears briefly on the display.
the number of times needed to display the
'Machine
settings' /
'Machine settings'
'Display'
the number of times needed to display the start
'Machine settings'
'Machine settings'
'Factory setting'
'Display'
you can set the
is displayed.
is displayed.
/
'Factory setting'
is displayed.
is displayed in
the