Permanent Settings In Programming Mode - Jura GIGA X8 Instructions For Use Manual

4 Permanent settings in programming mode

J WARNING
Program item
'Maintenance
status' ('1/4')
'Machine
settings' ('2/4')
Hot coffee, hot steam and hot water can cause scalding. Scalding is
a serious burn.
T Use extreme care when handling hot liquid or steam.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area with cold water an
seek medical attention.
T Keep children AWAY.
Touch ' P '
display or turn the Rotary Switch to navigate through the program
items and permanently save the desired settings. The following
settings can be made:
Sub-item
'Clean',
'Change the filter'
(only if filter is fitted),
'Descale',
'Clean the milk system',
'Rinse',
'Lock display',
'Maintenance information'
'Switch off after'
'Time',
'Date'
'Timer'
'Beans à la carte'
'Set consistency of grind'
'Save energy'
'Lock/enable'
'Factory setting'
4 Permanent settings in programming mode
to enter programming mode. Move your finger across the
Explanation
T Start the required maintenance program
here.
T Set the time after which the GIGA should
switch off automatically.
T Set the time and date to use the timer
function on your GIGA.
T Specify a switch-on and switch-off time for
each weekday.
T Activate the grinder selection.
T Adjust the consistency of grind for both
grinders to the coffee beans used.
T Activate energy-saving mode.
T Disable different machine functions.
T Reset the machine to its factory setting.
25