Table of Contents
Advertisement
Expansion Slots
This mainboard has one AGP, one CNR and five 32-bit PCI slots.
PCI3
PCI5
CNR1
PCI4
PCI2
Follow the steps below to install one AGP/CNR/PCI expansion
card.
1. Locate the AGP, CNR or PCI slots on the mainboard.
2. Remove the blanking plate of the slot from the system chassis.
3. Install the edge connector of the expansion card into the slot.
Ensure the edge connector is correctly seated in the slot.
4. Secure the metal bracket of the card to the system chassis with
a screw.
PCI1
AGP1
17
Advertisement
Table of Contents
