Table of Contents
Advertisement
Pin
Signal
1
VCC
3
DATA1-
5
DATA1+
7
GND
9
KEY
1. Locate the JUSB1 header on the mainboard.
2. Plug the bracket cable onto the JUSB1 header.
3. Remove a slot cover from one of the expansion slots on the
system chassis. Install an extension bracket in the opening.
Secure the extension bracket to the chassis with a screw.
READ1: USB Card Reader Connector (optional)
This connector is for connecting internal USB card reader. You can
use a card reader to read or transfer files and digital images to your
computer.
Pin
1
3
5
The JUSBC is shared with one of the USB ports of the I/O
back panel. The USB port is located beside the serial port
connectors. See "I/O Ports" for more information.
Please check the pin assignment of the cable and the USB
header on the mainboard. Make sure the pin assignment
will match before plugging in. Any incorrect usage may
cause unexpected damage to the system. The vendor won't
be responsible for any incidental or consequential damage
arising from the usage or misusage of the purchased
product.
IR1: Infrared Port
The infrared port allows the wireless exchange of information
between your computer and similarly equipped devices such as
printers, laptops, Personal Digital Assistants (PDAs), and other
computers.
Pin
Signal
2
VCC
4
DATA2-
6
DATA2+
8
GND
10
NC
Signal
Pin
Signal
VCC
2
USB-
USB+
4
GND
KEY
14
Advertisement
Table of Contents
