Yardworks 60-3757-8 Owner's Manual page 8

Shift Rod
FIGURE 8
Place the shift lever in the fastest for-
•
ward position. Push the shift rod and
shift arm assembly down sharply, as far
as it will go, to put the drive into the
fastest forward position. Thread the fer-
rule in or out on the shift rod as
necessary until the ferrule lines up with
the hole in the shift lever as shown in
Figure 9. Insert ferrule in the hole
shown and secure with flat washer (R)
and internal cotter pin (G).
Clutch lever in
release position
Cable Tie
Shift Rod
Shift Arm
Assembly
FIGURE 10
Cotter Pin (G)
Flat Washer (R)
Shift
Arm
Assembly
Ferrule (K)
Upper Shift Rod
FIGURE 9
NOTE: Another counter clockwise
turn on the ferrule may be neces-
sary if the unit does not engage
into first gear properly.
* Oval Truss Head
Machine Screw (M)
cut-out
Cotter Pin (G)
Flat Washer (R)
Flat Washer (R)
Cotter Pin (G)
8
Ferrule (K)
Flat Washer (R)
Cotter
Pin (G)
* Trigger
Assembly
* Steering
Cable
Outside
cut-out
Inside
*
optional