Alarm Display - Trane IPG315D User Manual

Alarm display

The system is able to identify all the alarms that may damage the unit.
When any type of fault or error on the unit occurs, the alarm symbol flashes on the display and
the buzzer will be on.
Press any key to turn the buzz off.
Press the "Alarm" button to view a brief description of the alarm.
Once the problem is solved, the same screen will show the steps to reset and reboot the unit.
The methodologies of alarms reset are different depending on the magnitude of the alarm, according
to the sequence priority:
Resettable alarm: low priority, resettable by button;
Resettable alarm with password: high priority, resettable by service center.
To reset an alarm you must press the button identified by "RESET".
Pressing this button you can reset the highlighted alarm; if you want to reset all low priority alarms,
you can press the key identified by "RST ALL".