Table of Contents
Advertisement
Online Datalogger
The device is equipped with a web page where you can view and record all the main operating data
with a record time that can be set from 3 to 60 seconds.
To use this feature of the microprocessor is necessary to connect the PC to the card via LAN cable
cross type. For the IPG108D and IPG108E you have to use an USB/ETHERNET converter.
Set the IP address of the PC in the Internet Protocol Version 4 (TCP/IPv4) LAN connection in this way:
Address IP : 192.168.0.252
Subnet mask : 255.255.255.0
Open a browser and write the IP addresses of the devices: 192.168.0.250 default address,
This will open a Web page where you would add the following credentials:
User = admin
Password = Dixell
Example of this web page:
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
