Reset Function; Effect Adjust; Users Mode Set - Future light PLB-15R User Manual

Key lock
With this function you can lock the keys of the Control Board to e.g. prevent menu tampering. If this function
is activated, the keys will be automatically locked in 15 seconds from the last command. In order to
deactivate or temporarily deactivate the keylock function, press the Mode/Esc button for 3 seconds to regain
access to the menu commands.
Select temperature designation
With this function you can select the temperature designation.
• Select "Temp. C/F" by pressing Up or Down.
• Press the Enter-button, the display shows "Celsius".
• Press Up or Down to select the desired degree between "Celsius" and "Fahrenheit".
• Press the Enter-button to confirm.
• Press the Mode/Esc-button in order to return to the main menu.
Initial status
With this function, you can adjust with which value the respective channels will start.
Wireless DMX
From factory, this projector is prepared for wireless data transmission (W-DMX). With this function, you can
de-activate W-DMX, activate W-DMX, loopthrough data, or log out the projector.
• Select "Wireless DMX" by pressing Up or Down.
• Press Enter to confirm; the display shows "Activate WDMX".
• Press Up or Down to select "WDMX Off", "Act & Data Out", "Clean WDMX memo" or "Activate WDMX".
• Press the Enter-button to confirm.
• Press the Mode/Esc-button in order to return to the main menu.

Reset function

With this function you can reset the device via the Control Board. You can select the different Reset-
functions by pressing Up or Down.
Restore factory settings
With this function you can restore the factory settings of the device. All settings will be set back to the default
values (shaded). Any edited scenes will be lost.

Effect Adjust

Test function of each channel
With this function you can test each channel on its (correct) function.
Manual control
With this function, you can adjust each channel manually.
Calibration
With this function, you can calibrate and adjust the effect wheels to their correct positions. The password for
this function is „050".

Users mode set

User mode
With this function, you can create user defined channel orders.
Edit User mode
With this function, you can adjust the Preset user definition.
56/60 00072726, Version 1.0