Transport Securing; Rigging - Future light PLB-15R User Manual

Remove the fixation-ring with an appropriate tool. Remove the gobo and insert the new gobo. Press the
fixation-ring together and insert it in front of the gobo.

Transport securing

The PLB-15R comes with locked transport securings in order to avoid damages.
Please note: All transport securing must be unlocked before operating the device!
TILT-securing:
Turn the two stop levers at the projector head from Lock to Unlock. Now, the projector head can be freely
moved in the Y-direction.
PAN-securing:
Turn the stop levers at the bottom of the projector arm from Lock to Unlock. Now, the projector head can be
freely moved in the X-direction.
Before transporting the device, please turn all stop levers from Unlock to Lock.

Rigging

Please consider the EN 60598-2-17 and the respective national norms during the
installation! The installation must only be carried out by an authorized dealer!
The installation of the projector has to be built and constructed in a way that it can hold 10 times the weight
for 1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net.
This secondary safety attachment must be constructed in a way that no part of the installation can fall down
if the main attachment fails.
Slot-in gobo-system for exchanging gobos without tools!
Inserting/Exchanging gobos as described above.
Do not operate this device with opened cover!
Notes!
DANGER TO LIFE!
41/60 00072726, Version 1.0