Programming Lock - janitza Prophi 15T-III Manual

Prophi 15T-III
®
39 CLOCK [ HH:MM ], DATE
Set system-time and date
(Due to an internal battery the time will be kept even in
case of power loss)
Selection with é / ê. Save/continue with ENTER
40 CONTRAST
Adjustment of display contrast for best readability
Selection with é / ê. Save/continue with ENTER
41 BASIC SETTINGS
When selecting YES and confirmated with ENTER, all
parameters are set back to the basic settings of the
panel builder (optimum values for the system if
the controller has been delivered together with the PFC-
system). If the controller has been delivered ex works,
this point corresponds to the default settings.
ATTENTION: All user settings get lost !
Section 6.1: PROGRAMMING LOCK
As a protection against unauthorized changes of the system
parameters, the device is equipped with a programming lock. This
can be activated in the EXPERT MODE. When the lock is active, all
parameters can be checked but not changed.
Alternatives:
Lock active / Not active / Automatic activation after 24 h
Section 7: HELP-Functions / actual output assignment
The Prophi 15T-III features a context related help function.
For each menu item one or more help pages are available which can be accessed directly
with the HELP-button. Scrolling is done with "UP/DOWN" buttons, back retrace with
ESCape.
In automatic operation (==AUTO-MODE==) 9 help pages are available. The first pages
explain the general meaning of used symbols.
On the help pages 7...9 the actual assignment of the internal transistor outputs
to the phases and to the capacitors are shown directly.
This table depends on the CONTROL-MODE that is set and will change
automatically.
The assignment shown here is not trivial, especially in CONTROL-MODE 2
!
(MIXED MODE) and must be obeyed without exeption!
s. example next page
20
=== PROGRAM-MODE ===
[DD.MM.YY]
[ 6 ] ( 0...10)
[ NO ] (YES/NO)
- 19 -
PROGRAM-MODE
39 CLOCK
[ 15]: 27
MONDAY
05.03.2019
PROGRAM-MODE
41 BASIC SETTINGS
[NO ]
EXPERT-MODE
7 OPERATING LOCK
[NO ]