Fronius GEN24 Operating Instructions Manual page 5

Risk due to unauthorised access.
Incorrectly set parameters can negatively influence the public grid and/or the in-
verter feeding energy into the grid, and lead to a loss of conformity with the
standard.
▶
▶
Adjusting para- The "Fronius Solar.start" app is needed for registration. Depending on the end
meters with the device, the app is available on the respective platform.
Fronius Sol-
ar.start app
Fronius Solar.start
1
2
3
4
5
6
7
Adjusting para- WLAN:
meters with the
browser
open access point
1
CAUTION!
The parameters may only be adjusted by installers/service technicians from
authorised specialist companies.
Do not give the access code to third parties and/or unauthorised persons.
1
Start the installation in the app.
Select the product to which the connection should be established.
Open the access point by touching the sensor once
flashes blue.
Select the "Technician" user in the "User menu" and enter and confirm the
password for the "Technician" user.
Call up the "Safety and grid regulations" → "Country setup" menu area.
Enter the requested access code (see chapter
input field "Access code country setup" and click the button "Activate".
Adjust the parameters in the individual menu areas taking into account the
nationally applicable standards and/or the specifications of the energy pro-
vider.
1
Open the access point by touching the sensor once
flashes blue.
Setup your PV system in a few minutes.
START INSTALLATION
LOGIN
Log in with your Fronius credentials (email adress
& password) in order to get the most out of the
PV System. Installing a new product does not
require a Login.
Imprint & Contact Data Privacy Terms & Conditions
Access code
FRONIUS_PILOTxxx
Secured
2
Password:
12345678
2
open access point
→ Communication LED:
on page 4) in the
192.168.250.181
→ Communication LED:
5