Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co.,Ltd.
6.58 Set service name UUID
Instruction
<SVRUUIDxxx>
After the data length is out of range, return <RANGE_ERR>,When succeed return to <OK>.
6.59 Set RXUUID
Instruction
<RXUUIDxxx>
After the data length is out of range, return<RANGE_ERR>,When succeed return to <OK>.
6.60 Set TXUUID
Instruction
<TXUUIDxxx>
After the data length is out of range, return<RANGE_ERR>, When succeed return to <OK>.
6.61 Set MTU length
Instruction
<MTUx>
After the data length is out of range, return <RANGE_ERR>，When succeed return to <OK>.
6.62 Inquiry MTU length
Instruction
Copyright ©2012–2019, Chengdu Ebyte Electronic Technology Co.,Ltd.
The length of the configuration xxx (HEX format) is mainly specified by
"<SVRUUIDxxx >", and the UUID parameter is 2 bytes (or 16 bytes). This command
mainly configures the service name UUID and is updated on the next connection.
The length of configuration xxx (HEX format) is mainly specified by "<RXUUIDx>", and
the UUID parameter is 2 bytes (or 16 bytes). This command mainly configures the UUID of
BLE DATA BUFF and is updated on the next
The length of configuration xxx (HEX format) is mainly specified by "<TXUUIDxxx>", and
the UUID parameter is 2 bytes (or 16 bytes). This command mainly configures the UUID of
CENTER DATA BUFF and is updated on the next connection.
Configure 1-byte (hex) data specified by x. The value of x ranges from 20 to 128.
If set to 20 bytes, <MTULEN14> <OK>.
Description
Description
connection.
Description
Description
The default is 20 bytes.
Description
E104-BT02 User Manual
21
Advertisement
Table of Contents
