Chengdu Ebyte Electronic Technology Co.,Ltd.
6.9 Instruction for starting broadcast
Instruction
<STARTADV>
6.10 Instruction for stopping broadcast
Instruction
<STOPADV>
6.11 Broadcast state inquiry
Instruction
<ADVSTATE>
For example, when broadcast is started, return to <ADVON>, when closed, return to <ADVOFF>
Special note: When broadcast is started in any case (including sleep mode), module will carry out periodic broadcasting according
to configured gap. This instruction only supports master. Slave sends instruction and returns to <INVALID_ERR>.
6.12 Set general broadcasting data
Instruction
<ADVDATAxxx>
Length of broadcasting data is out of range, return to<RANGE_ERR>, when succeed, return to<OK>.
Special note: General broadcasting and IBeacon broadcasting can be started at the same time, i.e., every two general broadcasting
data is broadcasted, two IBeacon broadcasting data is switched. Special note: General broadcasting and IBeacon broadcasting can
be started at the same time, i.e., every two general broadcasting data is broadcasted, two IBeacon broadcasting data is switched.
6.13 Set IBeacon broadcasting data
Instruction
<IBACONxxx>
Length of broadcasting data is out of range, return to<RANGE_ERR>, when succeed, return to<OK>.
Special note: General broadcasting and IBeacon broadcasting can be started at the same time, i.e., when every two general
Copyright ©2012–2019, Chengdu Ebyte Electronic Technology Co.,Ltd.
When succeed return to <OK>
When succeed return to <OK>
Set broadcasting data of max 22 bytes (hex) assigned by xxx, update data in the
next broadcasting period, and clear data if it is not assigned by xxx.
Set broadcasting data of max 25 bytes (hex) assigned by xxx, update data in the
next broadcasting period, and clear data if it is not assigned by xxx.
broadcasting data is broadcasted, two IBeacon broadcasting data is switched.
Description
Start broadcasting
Description
Stop broadcasting
Description
Read present broadcast state
Description
Description
E104-BT02 User Manual
11