Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co.,Ltd.
6.44 Start mode feedback
Instruction
<WSMON>
6.45 Turn off mode feedback
Instruction
<WSMOFF>
6.46 Start scanning
Instruction
<STARTSCAN>
NOTE: 1. This instruction is only valid for master. It is not available for slave and return to <INVALID_ERR>.
2. If the master is connected return to <CONNECTED>, which means scanning is stoppedwhen connected and
one can carry out scanning after disconnected.
3. Power consumption of master will rise when scanning is on.
6.47 Stop scanning
Instruction
<STOPSCAN>
NOTE: 1. This instruction is only valid for master. It is not available for slave and return to<INVALID_ERR>.
2. If the master is connected return to <CONNECTED>, which means scanning is stopped when connected and
one can carry out scanning after disconnected.
3. Power consumption of master will rise when scanning is on.
Copyright ©2012–2019, Chengdu Ebyte Electronic Technology Co.,Ltd.
When succeed return to <OK>.
To switch to ports in sleep mode, output "SLEEP"; to switch to wake-up mode, output
When succeed return to <OK>.
When succeed return to <OK>.
When succeed return to<OK>.
When succeed return to<OK>.
Description
Start mode feedback.
"WAKEUP"
Description
Turn off mode feedback.
Description
Start master's scanning
Description
Stop master's scanning
E104-BT02 User Manual
18
Advertisement
Table of Contents
