Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co.,Ltd.
When parameter is out of range return to<RANGE_ERR>; when succeed return to<OK> Special note: The configuration is
stored at once but it only takes effect after exiting configuration mode. Uninterrupted continuous transmission below 19200bps
6.4 Read instruction for baud rate of serial port
Instruction
<COMBAUD>
6.5 Serial port stop bit configuration
Instruction
<xSB>
Special note: This configuration is saved immediately, but only takes effect after exiting configuration mode.
6.6 Read instruction for stop bit of serial port
Instruction
<STOPBIT>
6.7 Configuration instruction for parity bit of serial port
Instruction
<PEVEN>
<PODD>
<PNO>
Special note: The configuration is stored at once but it only takes effect after exiting configuration mode.
6.8 Read instruction for parity bit of serial port
Instruction
<PARITY>
For example，for no parity return to<NOP>, for even parity check return to <EVENP>, for odd parity check return to
Copyright ©2012–2019, Chengdu Ebyte Electronic Technology Co.,Ltd.
from the slave to the master is available.
Read the current baud rate configuration.
For example, the baud rate is 19200bps, return <19200>
Configure the number of serial port stop bits specified by x (ASCII code), optional
When succeed return to<OK>
For example, for one stop bit return to <STOPBIT1>
When succeed, return to<OK>
<ODDP>
Description
Description
1 and 2 stop bits.
Description
Read present stop bit configuration
Description
Even parity check of serial port
Odd parity check of serial port
No parity
Description
Read parity bit configuration
E104-BT02 User Manual
10
Advertisement
Table of Contents
