At+Linkslave Slave Max Link Quantity; At+Uuidsvr128 Set 128-Bit Uuid - Ebyte E104-BT5032A/B User Manual

Chengdu Ebyte Electronic Technology Co., Ltd
1. Take effect immediately, save after power off.
2. If 4 devices are currently connected, but 2 are set at this time, the master will not
Remarks
disconnect the connected devices.
3. The instruction supports firmware version: V1.1.
4. The number of connections is limited to automatic connections only.
AT+LINKSLAVE
7.4.39
AT+LINKSLAVE?
Query
AT+ LINKSLAVE =[para]
Set
para(ASCCII): max link quantity. range：1~4
Parameter
Dafault：4
1. Take effect immediately, save after power off.
2. If 4 devices are currently connected, but 2 are set at this time, the slave will not disconnect the connected
Remarks devices.
3. The instruction supports firmware version: V1.1.
4. The number of connections is limited to automatic connections only.

7.4.40 AT+UUIDSVR128 set 128-bit UUID

Query AT+UUIDSVR128?
Set AT+ UUIDSVR128=[para]
Parameter para(HEX):16-bit uuid.
1、 take into effect after reset and save when power off。
2、 the 2，3byte is 16-bit uuid, ranging from 1~65535;
Remarks
3、 128-bit UUID，except for 2，3byte, are used for the slave, the master and configuration channel.(Check
details about uuid from《BLUETOOTH SPECIFICATION Version 5.0 | Vol 3, Part B 2.5.1 UUID》).
Set 128-bit UUID：
"11 22 33 44 55 66 77 88 99 00 aa bb cc dd ee ff"(HEX)
For example
AT command is （HEX）：
61 74 2b 75 75 69 64 73 76 72 31 32 38 3d 11 22 33 44 55 66 77 88 99 00 aa bb cc dd ee ff
Copyright ©2012–2024，Chengdu Ebyte Electronic Technology Co., Ltd
Slave max link quantity
command
command
respond
+OK=[para]
+OK：success
+ERR=[NUM]：error
respond
+OK=[para]
+OK：success
+ERR=[NUM]：error
E104-BT5032A User Manual
36