Quick Use; Configuration Mode Quick Start Guide; Serial Port Configuration; Air Configuration - Ebyte E104-BT09 User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.

7. Quick use

Recommended software for debugging/testing:
PC side serial port tool - XCOM.exe;.
Mobile phone side ble debugging APP - nRF connect.

7.1 Configuration Mode Quick Start Guide

7.1.1 Serial Port Configuration

set XCOM string related configuration (default configuration: 115200, 8, 1, none, no flow control), such as Figure
VII-1 XCOM parameter configuration diagram;
follows the instructions shown in the AT command table to configure the module;

7.1.2 Air configuration

Over-the-air configuration can only be used if the module is a slave.
Open the app "nRF connect", start scanning for devices and find the "EBYTEBLE" connection module;
Copyright ©2012–2023，Chengdu Ebyte Electronic Technology Co.,Ltd.
E104-BT09 User Manual
19