Chengdu Ebyte Electronic Technology Co., Ltd
8. Quick start
Recommended debugging and testing software:
Serial tool on PC - SSCOM.exe;
Ble debugging APP on phone- nRF connect.
8.1 Guidance for configuration mode
8.1.1 UART configuration
Check if the module is in configuration mode(When not connected, it can be configured, otherwise, set pin mod as low level)
Set SSCOM string related parameter(default:115200,8,1,none, no flow control);
Refer to 6.4 command list to configure the module;
8.1.2 Configuration over air
When module works as the slave, configuration over air is available.
Open app "nRF connect", start scanning device,find "E104-BT5032A" to connect;
Copyright ©2012–2024,Chengdu Ebyte Electronic Technology Co., Ltd
SSCOM parameter setting figure
E104-BT5032A User Manual
44