Reed Instruments R5090 Instruction Manual

R5090 Power Meter
Introduction
Thank you for purchasing your REED R5090 Power Meter. Please read the
following instructions carefully before using your instrument. By following the
steps outlined in this manual your meter will provide years of reliable service.
Product Quality
This product has been manufactured in an ISO 9001 facility and has been calibrated
during the manufacturing process to meet stated product specifications.
Safety
Warnings
This manual includes important safety and instrument maintenance information.
Please read each part of this manual carefully before use. Any misunderstanding of
the information in this manual may lead to physical injury and/or product damage
• Do not expose this product to water, rain, moisture, dust or
extreme temperatures.
• Do not expose to naked flames or other heat sources.
• Do not drop or subject the device to undue shock.
• Keep device away from magnets at all times.
• Keep away from direct sunlight. Indoor use only.
• Unplug this device during lightning storms.
EU certification related information.
This symbol signifies the product complies with both USA and Canada
requirements.
Safety Instructions
• Never attempt to repair or modify your instrument. Dismantling your product,
other than for the purpose of replacing batteries, may cause damage that will
not be covered under the manufacturer's warranty. Servicing should only be
provided by an authorized service center.
• Do not use if product is damaged.
• In the event of any abnormal operation, please do not use this power meter. Keep
this power meter away from explosive gases, vapor and dust environments.
• The load power of electrical appliance of this product should not exceed its
rated power of 1800W or a maximum current of 15A. When running under a
full load, it is recommended not to exceed 1 hour of continuous use.
Instrument Description
1. LCD Display
2. Cost Button
3. Model Button
4. Set Button
5. "+"/Reset/Power Button
6. Power Input Socket
Display Description
The dual LCD display area provides two readings. The upper
reading is the main display area and each unit of measurement
can be toggled through by pressing the MODEL button. The
lower reading is a secondary display area and each logging
function can be toggled through by pressing the COST button.
Features and Specifications
The R5090 is an easy-to-use power meter that accurately measures power
consumption of household appliances. Simply set the local utility rate in Kilowatt-
hours (KwH) and connect an appliance to start tracking cost. The R5090 can be
used to verify power quality by monitoring voltage, frequency and power factor.
• Calculates the operating costs of household appliances
• Displays 8 important units of measure (voltage, current, watts,
frequency, power factor, energy used (kWh), total cost and elapsed time)
• Over-current warning function
• Easy-to-read, dual LCD display
• Built-in battery backup
• Conforms to UL and CSA standards
Measuring Ranges & Accuracy
Voltage:
Current:
Power:
Voltage
!
Current
Hz
Power
Factor
V A
Freq Power Factor:
Total time
S/kWh
Frequency:
Cost
Set Energy
Logging Ranges
kg
CO
2
Energy:
Hour Min Day
Cost:
Total Time:
Display:
Display Update:
Overrange Indicator:
Voltage
Power Supply:
Overvoltage Category:
Product Certifications:
V
Total time
Storage Temperature:
Operating Humidity
Hour Min
Range:
Dimensions:
Weight:
Function Keys Description
1. The COST button cycles through each function in the upper display
Voltage
as indicated by "Total time", "Cost", "Set", "Energy" and "CO
2. The MODEL button, cycles through each function in the lower
display as indicated by "Voltage" , "Current", "Power", "Power
V
Factor" and "Freq".
Total time
3. The SET button allows you to configure the CO
4. The + button has three main functions, the first is to increase the
4
number of digits when configuring the CO
cycle. The second is the reset function; reset the Energy, Cost or
5
emission load of CO
3
to power on the unit when power is off.
6
Operating Instructions
1. Plug the power meter into a household receptacle and it will automatically start.
2. Select the desired function by pressing the MODEL button.
Voltage
!
Current
Hz 3. Return to the default function ("Voltage") by holding the MODEL button.
Power Voltage
Factor Current
V A
Freq
Power
Note: If the unit has been in use for less than 1 day, only "Hour and Min" will
Factor
Total time Freq
S/kWh
Cost
be displayed as shown in Figure 1 below. Check elapsed time by pressing the
Total time
Set Energy
CO kg Cost
2
Set Energy
Hour Min Day + button as shown in Figure 2. If the time accumulated exceeds 1 day, it will be
CO
2
Hour
displayed in the form of "Day" as shown in Figure 3. To view the total accumu-
lated time, press the + button to display "Day" followed by "Hour and Min".
Voltage
Voltage
Voltage
V
V
Total time
Total time
Total time
Hour Min
Day
Hour
Figure 1
Voltage
Voltage
www.REEDINSTRUMENTS.com
V
Total time
Total time
Range: 100 to 150VAC (60Hz); Accuracy: ±(1% rdg.+1dgt.)
Range: 0 to 15A; Accuracy: ±(1% rdg. + 10dgt.)
@ 0.010 to 0.999A; ±(1% rdg.+ 5dgt.) @ 1.00 to 15.00A
Range: 0 to 1800W; Accuracy: ±(1% rdg. + 10dgt.)
@ 1.0 to 100.0W; ±(1% rdg. + 5dgt.) @ 100.0 to 999.9W;
±(1% rdg. + 1dgt.) @ 1000 ~ 1800W
Range: 0 to 1.00; Accuracy: ±(2% rdg. + 10dgt.)
@ 0.30 to 0.49; ±(2% rdg. + 5dgt.) @ 0.50 to 1
Range: 45 to 65Hz; Accuracy: ±(1% rdg. + 1dgt.)
0 to 9999kWh
$0 to $9999
0 minutes to 9999 days
Dual LCD
1 time/second
Yes
1 x 3V (CR2032, back up battery) Voltage
CAT. II 150V
CE, ETL, Conforms to UL STD.61010-1,
V
61010-2-030; Certified to CSA STD.
C22.2 NO.61010-1, 61010-2-030
Total time
Voltage
14 to 140°F (-10 to 60°C) Current
Power
Factor
Freq
10 to 90%
Day Total time
Cost
5.1 x 2.6 x 1.5" (130 x 65 x 37mm) Set Energy
CO
2
1.9 oz (155g)
Voltage
".
2
Total time
& KWh cost functions.
2
& kWh costs at a 0-9
2
Voltage
Voltage
!
Current
by holding it down. The + button is also used
Hz
Power
2
Factor
Freq V A
Total time
Total time
S/kWh
Cost
Set Energy
CO kg
2
Hour
Min Day
Voltage
Voltage
Voltage
!
Current
!
Hz
Power
Hz
Factor
S/kWh
V A V Cost
Freq
V A
Set
Set
CO Total time Total time kg
2 S/kWh Total time
S/kWh Cost Set
Set Energy CO
2
kg
CO
kg 2
Hour Min Day
Hour Min
Min Day Day
S/kWh
Voltage
Cost
Voltage Voltage
Voltage
Set Set
CO kg
2 Set
CO
2
V
V V V
V
Total time
Total time Total time
Total time
Hour Min
Min Day
Day
Figure 2
Figure 3
COST MODEL SET
COST MODEL SET
Voltage
MODEL
V MODEL
V
Total time
Instruction Manual
Setting the CO Cost Function
2
The production of energy releases greenhouse gases (among others carbon
dioxide CO ), which places a burden on the environment. With this device, you
2
are able to determine how much CO
measured kWh value. There are different CO
type of energy. The CO equivalent indicates how much of a defined
2
quantity of a greenhouse gas contributes to the greenhouse effect. Carbon
dioxide serves as a comparison value.
The factor for the CO equivalents is entered in the device
2
in kg/kWh and displayed accordingly in kg/kWh. You can
Voltage
!
Current
find information on the CO equivalents to be entered on
Hz
Power
2
Factor
V A
your power bill and on the internet, technical manuals or by Freq
Total time
contacting your energy supplier.
S/kWh
Cost
Set Energy
1. To set your kg/kWh cost, switch to the "CO kg
CO
2
Hour Min Day
function by pressing the COST button. Cost
Set
Set
2. Once the CO parameter is visible press and hold the
CO
kg
2
2
SET button.
Voltage
3. Adjust the values by pressing the + button.
4. When the desired value has been set, save the data by
V
holding the SET button.
Total time
Setting the kWh Cost Function
Hour Min
To accurately calculate the actual cost of electricity consumed and to project
future costs, first you must set your local utility's electric rate into the unit. Cost
Set
Set
The rate is typically charged as dollars (or cents) per kilowatt-hour (KWH). You
CO
kg
2
Voltage
can find this rate on your last utility bill or you can contact your utility supplier
directly to confirm your rate.
V
1. To set your kWh cost function, switch to "kWh" cost
!
Total time
Hz
function by pressing the COST button.
V A
2. Once the kWh parameter is visible press and hold the
S/kWh
SET button.
kg
Hour
Min Day
3. Adjust the rate values by pressing the + button.
Note: if your utility charge is 10.6 cents per KWH, set the
rate to $0.106 on the LCD display.
COST MODEL SET
4. When the desired value has been set, save the data by Voltage
holding the SET button.
V
V
Total time
MODEL Battery Replacement
Please ensure the meter has been disconnected from
Hour Min
Day
power prior to replacing battery. Remove the battery cover
SET
with a screwdriver.
Once the cover has been removed, replace the battery cell
and tighten the cover back on. See the following figure for
detailed steps:
V
S/kWh
Cost
Set
Set Product Support
CO kg
2
If you have any questions on your product, please contact your authorized
REED distributor or REED Instruments Customer Service by phone at
1-877-849-2127 or by email at info@reedinstruments.com.
S/kWh
Cost
Set Set
CO kg
2
Please visit www.REEDINSTRUMENTS.com for the most
V
S/kWh
Cost
S/kWh
Cost
Set Set
up-to-date manuals, datasheets, product guides and software.
Set
CO kg
2
kg
Product specifications subject to change without notice. All rights
reserved. Any unauthorized copying or reproduction of this manual is
COST MODEL SET
S/kWh
strictly prohibited without prior written permission from REED Instruments.
S/kWh Cost
Cost
Set Set
Set
CO kg
2
kg
MODEL
SET
COST MODEL SET
MODEL
White
is released by an energy supplier with the
2
equivalents depending on the
2
Set
CO
kg
2
" cost
2 S/kWh
Voltage
Set
CO kg
2
V
Total time
Day
S/kWh
COST MODEL SET
MODEL
SET
S/kWh
Cost
Set
Set
CO
kg
2
S/kWh
Cost
Set Set
CO
kg
2
COST MODEL SET
MODEL
SET