Enabling Iscsi Policy (Gen10) Or Software Initiator (Gen10 Plus) - HP ProLiant Gen10 User Manual

Enabling iSCSI Policy (Gen10) or Software Initiator (Gen10 Plus)

Enabling iSCSI Policy (Gen10) or Software Initiator (Gen10 Plus)
Enables or disables the iSCSI Software Initiator. When enabled, the system's iSCSI Software Initiator will be used to access iSCSI targets
on any configured NIC ports. When disabled, the system's iSCSI Software Initiator will not attempt to access any configured iSCSI
targets.
Procedure Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Network Options > Network
Boot Options > iSCSI Policy (Gen10) or iSCSI Software Initiator (Gen10 Plus).
2. Select a setting.
Enabled—Enables the UEFI iSCSI software initiator.
Disabled—Disables the UEFI iSCSI software initiator.
NOTE: NOTE:
This option only controls whether the iSCSI Software Initiator is Enabled or Disabled. To enable iSCSI boot from the
adapter initiator, you must enable iSCSI in the adapter firmware and configure it.
3. Save your changes.
Enabling iSCSI Policy (Gen10) or Software Initiator (Gen10 Plus) 222