Cannot Boot Devices - HP ProLiant Gen10 User Manual

Cannot boot devices

Cannot boot devices
Symptom Symptom
You see a message that the option or device you want to boot cannot be found, or it is listed in the system configuration as an
unknown device.
Solution 1 Solution 1
Cause Cause
You are attempting to boot to an option that does not have a UEFI Option ROM driver.
Action Action
1. Verify that your option card has a UEFI option driver (Option ROM) that supports either x64 or EFI Byte Code for boot
functionality.
NOTE: NOTE:
UEFI drivers do not display messages on the System Utilities screen or provide function key prompts.
If you replace the motherboard, UEFI variables are lost.
You must configure PXE servers with a boot image. For x64 EFI machines, you must also configure the DHCP
server to support x64 EFI DHCP boot requests. For more information, see the UEFI Information Library:
https://www.hpe.com/info/ProLiantUEFI/docs https://www.hpe.com/info/ProLiantUEFI/docs
2. Retry the boot procedure.
Solution 2 Solution 2
Cause Cause
You are attempting to boot to an option that is not supported or is not running the latest firmware.
Action Action
1. Refer to the Quick Specs or Read This First card for your server to make sure that your card is supported before you install it.
Although third-party option cards might work, they are not optimized for servers running UEFI System Utilities.
2. Verify that the correct information is listed in the System Health settings for the option.
3. If necessary, use the latest SPP in offline mode to upgrade the firmware to the latest version.
Solution 3 Solution 3
Cause Cause
Your default boot mode settings are different than your user-defined settings.
Action Action
1. Use User Default Options to save a custom default configuration to use during a system restore.
2. Retry the boot procedure.
Cannot boot devices 394