Table of Contents
Advertisement
Performance management
Performance management
Selected HPE Gen10 and later servers support the following server performance management and tuning features:
Workload matching—Use preconfigured server profiles to maximize application performance.
Workload matching
Jitter smoothing—Use the Processor Jitter Control Mode setting to level and balance frequency fluctuation (jitter) resulting in lower
Jitter smoothing
latency.
Performance monitoring—View performance data collected from supported sensors on servers with Innovation Engine support. You
can configure alerts based on the collected data.
Workload advisor—View selected server workload characteristics. You can view and configure recommended performance tuning
settings based on the monitored data.
Core boosting—Enable this feature to produce higher performance across more active processor cores.
Core boosting
This feature is supported on Gen10 servers only. It is not supported on Gen10 Plus servers.
If you reset iLO to the factory default settings, all performance management settings and data are deleted.
When you use the iLO backup and restore feature, the performance management settings are retained. The collected performance data
is not backed up or restored.
Performance management
289
Advertisement
Table of Contents
