Setting The Network Location For The Embedded Ipxe Auto-Start Script - HP ProLiant Gen10 User Manual

Setting the network location for the Embedded iPXE auto-start script

Setting the network location for the Embedded iPXE auto-start script
Prerequisites Prerequisites
Embedded iPXE is enabled.
Embedded iPXE Auto-Start Script Location is set to Network Location or Auto.
Procedure Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Network Options >
Embedded iPXE > Network Location for iPXE Script-Auto Start .
2. Enter the network location of the .ipxe file.
Valid values are:
An HTTP/HTTPS URL for either an IPv4 or IPv6 server address or host name.
An FTP URL for either an IPv4 server address or host name.
Examples: Examples:
http://192.168.0.1/file/file.ipxe
http://example.com/file/file.ipxe
https://example.com/file/file.ipxe
http://[1234::1000]/file.ipxe
3. Save your setting.
Setting the network location for the Embedded iPXE auto-start script 238