Setting The Number Of Enabled Processor Cores - HP ProLiant Gen10 User Manual

Setting the number of enabled processor cores

Setting the number of enabled processor cores
This option enables limiting the number of enabled processor cores per physical processor. You can set the number of enabled cores to
a value supported by the physical processor.
Procedure Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Processor Options >
Enabled Cores per Processor .
2. Enter the number of cores to enable.
If you enter 0, or a value that is not supported by the processor, all cores are enabled.
3. Save your setting.
Setting the number of enabled processor cores 157