Configuring Amd Nbio Lclk Dpm Level - HP ProLiant Gen10 User Manual

Configuring AMD NBIO LCLK DPM Level

Configuring AMD NBIO LCLK DPM Level
Procedure Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance
Options > I/O Options > NBIO LCLK DPM Level .
2. Select a value:
Auto
Static Low
Static High
NOTE: Configuring the NBIO to Static High may improve performance on PCIe devices on the NBIO but will NOTE:
reduce performance in other portions of the processor. This setting should only be used after a review of PCIe
device requirements
3. Save your setting.
Configuring AMD NBIO LCLK DPM Level 270