Cannot Deploy From The Uefi Shell Script - HP ProLiant Gen10 User Manual

Cannot deploy from the UEFI Shell script

Cannot deploy from the UEFI Shell script
Symptom Symptom
You attempted to deploy an OS using the UEFI Shell script and you see an error message that the deployment failed.
Cause Cause
Configuration settings are not correct.
Action Action
1. Verify the following.
a. The Embedded UEFI Shell interface is added to the UEFI Boot Order list or the One-Time Boot Menu .
b. When added to the UEFI Boot Order list, the Embedded UEFI Shell interface is the first boot option in the UEFI Boot Order list
so that it overrides other boot options to load.
c. UEFI Shell Script Auto-Start is enabled.
d. The correct startup.nsh script file location in attached media or a network location is specified. If it is in attached media,
the startup.nsh script must be either inside the fsX:\ or the fsX:\efi\boot\ directory.
e. The .nsh script only contains supported commands.
f. Your system has enough RAM memory to create RAM disks during automated script execution.
g. Any OS boot loader or diagnostics application launched using the .nsh script is supported to run in UEFI the
environment.
h. If the shell script verification is enabled, ensure the script is enrolled in the Secure Boot database and that the script starts with
the line #!NSH.
2. Try the deployment again.
Cannot deploy from the UEFI Shell script 398