Camera Control; Add (Pair) A Camera; View A Camera - Oricom OBH930 User Manual

4.5 Camera Control

4.5.1

Add (pair) a camera

1. Press the button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until
the - (delete) / + (add) /
3. Press the + UP button or - DOWN button to select + (add), and press
the button to confirm.
Camera 1 / 2 / 3 / 4 will pop up. Press the + UP button or - DOWN
4.
button to select the desired Camera, and press the
searching for a camera unit.
Note: If a camera is currently paired with the Parent Unit, its camera
location (with a * beside it) cannot be selected for a new registration.
Press and hold the PAIR button on the bottom of the Baby Unit until
5.
the Parent Unit finds the camera, beeps and PAIR OK appears on the
screen. The video from the camera will then appear.
Note:
A camera can only be registered to one Parent Unit at any one time.
4.5.2

View a camera

1. Press the button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until
the - (delete) / + (add) /
3. Press the + UP button or - DOWN button to select
press the button to confirm.
4. Camera 1 / 2 / 3 / 4 will pop up, press the + UP button or - DOWN
button to select the desired Camera, and press the
picture from that camera.
Note:
Only camera locations with a * can be selected.
TIP
You can also press the
options from 1 / 2 / 3 / 4 ,
16
(view) /
(view) /
button repeatedly to select the available camera
(scan).
is highlighted, and
(scan) menu will pop up.
button to start
is highlighted, and
(scan) menu will pop up.
button to view the
Parent Unit Menu Options
(view), and