Delete A Camera; Scan Camera; Temperature - Oricom OBH930 User Manual

4.5.3

Delete a camera

1. Press the button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until
the - (delete) / + (add) /
3. Press the + UP button or - DOWN button to select - (delete), and
press the button to confirm.
4. Camera 1 / 2 / 3 / 4 will pop up, press the + UP button or - DOWN
button to select the desired Camera, and press the
5. Press the + UP button or - DOWN button to select
button to delete that camera.
Note:
You are not allowed to delete the camera if there is only one registered
camera in the system.
4.5.4

Scan camera

This function is only available when you have more than 1 Baby Unit
(Camera).
1. Press the button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until
the - (delete) / + (add) /
3. Press the + UP button or - DOWN button to select
press the button to confirm.
4. The screen will then display images from the different cameras in a loop
of Camera 1 / 2 / 3 / 4 , changing about every 12 seconds.
TIP
You can also press the
options from 1 / 2 / 3 / 4

4.6 Temperature

1. Press the button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until is highlighted.
Press + UP / - DOWN to select °C or °F.
3.
Parent Unit Menu Options
(view) /
(view) /
button repeatedly to select the available camera
,
(scan).
is highlighted, and
(scan) menu will pop up.
button.
is highlighted, and
(scan) menu will pop up.
, then press the
(scan), and
17