Boost Capacitors and Gate Drive Lines
Place the boost capacitors (C38, C46) close to their respective pins for maximum transfer of the capacitive energies. Place the gate driver
resistors (R35, R40, R44, R47) close to their respective pins. This limits the switching noise generated. Place the FET gate bleed resistors
(R36, R42, R45, R48) close to their respective FET gate pad/pin.
Figure 10. Boost Capacitors and Gate Drive Lines
14:mosfet driver resistor(R35,40,44,47)
15:Cboost(C38,46)
17:mosfet bleeding resistor(C36,42,45,48)
© 2019 Integrated Device Technology, Inc
17
14
17
15
14
15
14
11
P9235A-RB Layout Guide
March 19, 2019