Advertisement
Quick Links
To our customers,
st
On April 1
, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Old Company Name in Catalogs and Other Documents
Renesas Electronics website:
http://www.renesas.com
st
April 1
, 2010
Renesas Electronics Corporation
Advertisement
Related Manuals for Renesas Converter Board PCA7750G02
Summary of Contents for Renesas Converter Board PCA7750G02
- Page 1 On April 1 , 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding.
- Page 2 Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific”...
- Page 3 (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. • These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited to the customer's application;...
- Page 4 1. Outline The PCA7750G02 is a converter board from 80-pin 0.8-mm-pitch LCC (80D0) to standard-pitch (2.54-mm). The pins correspond one-to-one. 2. Pattern of Oscillator Circuits Figure 1 shows the oscillator circuit pattern. The holes 26 to 32 correspond to the pattern numbers of the S1.
- Page 5 (2) When the IC1 (oscillator module) is not used When not using the IC1, follow the procedure below (see (1) to (5) in Figure 3). For the capacitor capacity and the resistance value, contact the capacitor distributor. (1) Install an oscillator at the XTAL1. (2) Install capacitors at the C2 and C3.
-
Page 6: External Dimensions
Notes on This Product: IMPORTANT • We cannot accept any request for repair. • For inquiries about the product or the contents of this manual, contact your local distributor. Renesas Tools Homepage http://www.renesas.com/en/tools ( 4 / 4 ) Unit: mm...