AVGear AVG-DAX-100 User Manual

Advertisement

Quick Links

AVG-DAX-100
The AVG-DAX-100 is an audio extender, which
includes a Transmitter and a Receiver.
It extends TOSLINK, COAX signals up to 290m
and Analogue Stereo signals up to 170m via CAT
cable.
Features
 Select from three audio inputs,
TOSLINK, COAX or Analogue Stereo.
 Three synchronous audio outputs.
TOSLINK, COAX and Analogue
Stereo.
 Transmitter is powered from the
Receiver via PoC technology.
 Can transmit TOSLINK, COAX
signals up to 290m and the Analogue
Stereo signals up to 170m over a
single CATx cable.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AVG-DAX-100 and is the answer not in the manual?

Questions and answers

Summary of Contents for AVGear AVG-DAX-100

  • Page 1 TOSLINK, COAX and Analogue Stereo.  Transmitter is powered from the Receiver via PoC technology. The AVG-DAX-100 is an audio extender, which  Can transmit TOSLINK, COAX includes a Transmitter and a Receiver. signals up to 290m and the Analogue...
  • Page 2 AVG-DAX-100 PLEASE READ THIS PRODUCT MANUAL CAREFULLY BEFORE USING THIS PRODUCT. This manual is only for operational instruction only, and is not intended to be used for maintenance. The functions described in this version are current as at October 2016. Any changes of functions and operational parameters will be updated in future manual versions.
  • Page 3 AVG-DAX-100 SAFETY OPERATION GUIDE In order to guarantee the reliable operation of the equipment and safety of the user, please abide by the following procedures during installation, use and maintenance: 1. Do not install the device in an environment where it will be exposed to extreme hot or cold temperatures.
  • Page 4 AVG-DAX-100 TABLE OF CONTENTS Introduction ......................1 Introduction to the AVG-DAX-100 ...............1.1 Features ......................1.2 What’s in the Box ..……………………………………………………………………2 Product Appearance of the AVG-DAX-100 ............3 Transmitter ....................3.1 Receiver ......................3.2 Specifications ......................4...
  • Page 5 AVG-DAX-100 1. Introduction 1.1. Introduction to the AVG-DAX-100 The AVG-DAX-100 is an audio extender, which includes a Transmitter and a Receiver. It extends TOSLINK, COAX signals up to 290m and Analogue Stereo signals up to 170m via CAT cable. Features ...
  • Page 6 AVG-DAX-100 2. What’s in the Box?  1 x Transmitter  1 x Receiver  1 x Power Adapter (DC 12V 1A)  4 x Mounting ears with screws  8 x Rubber feet  1 x User Manual Note: Please confirm if the product and the accessories are all included, if not, please...
  • Page 7 C. RCA (L+R) audio output port. Connect to an amplifier or audio matrix. 1. Micro USB port for future firmware updates. 2. RJ45 port, connects to the TP OUT port of the AVG-DAX-100 Transmitter. Rear Panel 3. Power port, connects to the supplied 12VDC power adaptor.
  • Page 8 AVG-DAX-100 Specifications Transmitter Receiver Input TOSLINK, COAX or AUDIO Input 1 TP IN Output Output 1 TP OUT TOSLINK, COAX & RCA (L+R) General TOSLINK & COAX: PCM/Dobly/DTS; Audio Format AUDIO: Stereo Sound Channel TOSLINK & COAX: 2.0 - 7.1 Frequency Response 20 Hz to 20 kHz, ±3 dB...

Table of Contents