P2 Input/Output Connector Pin Assignments; 10 Base-T/100 Base-Tx Connector Pin Assignments; Table 5-15. P2 I/O Mode Connector; Table 5-16. 10 Base-T/100 Base-Tx Connector Pin Assignment - Motorola AltiVec MVME5100 Series Installation & Use Manual

Pin Assignments

P2 Input/Output Connector Pin Assignments

5
PIN
1
2
3
4

10 Base-T/100 Base-Tx Connector Pin Assignments

Table 5-16. 10 Base-T/100 Base-Tx Connector Pin Assignment

5-26
The table below provides connector P2 Input/Output (I/O) mode jumper
settings for the PMC P2 I/O mode and the MVME761 P2 I/O mode.
For PMC mode, place all jumpers (4) to connect the top row and the middle
row. For MVME 761 mode, place all jumpers (4) to connect the bottom
row and the middle row.

Table 5-15. P2 I/O mode Connector

TOP ROW
PMC MODE
JUMPER
PMC1_1 (J14-1)
PMC1_3 (J14-3)
PMC1_5 (J14-5)
PMC1_7 (J14-7)
The board's dual 10 Base-T/100 Base-Tx RJ45 connectors are located on
the front plate. The pin assignments for these connector's are as follows:
Pin
1
2
3
4
5
6
7
8
MIDDLE ROW
MVME5100 P2
I/O Pin
C1
C2
C3
C4
Assignment
TD+
TD-
RD+
AC Terminated
AC Terminated
RD-
AC Terminated
AC Terminated
Computer Group Literature Center Web Site
BOTTOM ROW
MVME761 MODE
JUMPER
RD- (10/100)
RD+ (10/100)
TD- (10/100)
TD+ (10/100)