Table of Contents
Advertisement
6 Using the product
6.2.
Performing settings
6.2.1.
Date/time
✓ The date/time menu has been opened, see Switching the
instrument on/off, page 19.
-
The date and time are displayed alternately.
1. Press
2. Set the date with
next value).
3. Press [OK].
4. Press
5. Set the time with
next value).
6. Press
-
The instrument switches to the measurement view.
6.2.2.
Configuration menu
✓ The configuration menu has been opened, see Switching the
instrument on/off, page 19.
-
1. Switch to the next engine operating point: press
2. Press [OK].
-
3. Set the engine number: press
4. Press [OK].
-
22
[set]
while the date is displayed.
[
[set]
while the time is displayed.
[
]
[OK]
twice.
lights up and the engine operating point value flashes.
There are twenty operating points (01 to 20) that can be
assigned to an engine.
lights up and the engine number flashes.
Ten engine numbers between 01 and 10 can be set.
lights up and the printer number flashes.
]
(increase value) and
(increase value) and
[
].
[
]
(switch to the
[
]
(switch to the
[
].
Advertisement
Table of Contents
