Tektronix TSG200 Instruction Manual page 77

TSG 200 — Replaceable Electrical Parts
with their associated electrical part (for example, fuse holder
follows fuse).
Chassis-mounted parts and cable assemblies have no
assembly number prefix and are located at the end of the
electrical parts list.
Tektronix Part No. (Column 2)
Indicates part number to be used when ordering replace-
ment part from Tektronix.
Serial/Assembly No. (Column 3 and 4)
Column three (3) indicates the serial or assembly number at
which the part was first used. Column four (4) indicates the
serial or assembly number at which the part was removed.
No serial or assembly number entered indicates part is
good for all serial numbers.
8–2
Name and Description (Column 5)
An item name is separated from the description by a colon
(:). Because of space limitations, an item name may
sometimes appear as incomplete. Use the U.S. Federal
Catalog handbook H6-1 for further item name identification.
The mechanical subparts are shown as *ATTACHED
PARTS* / *END ATTACHED PARTS* or *MOUNTING
PARTS* / *END MOUNTING PARTS* in column five (5).
Mfr. Code (Column 6)
Indicates the code number of the actual manufacturer of the
part. (Code to name and address cross reference can be
found immediately after this page.)
Mfr. Part No. (Column 7)
Indicates actual manufacturer's part number.