Prerequisites For Operation; Inverter Software Required - Fronius Datamanager 2.0 Operating Instructions Manual

Prerequisites for In order to ensure flawless data exchange online, a suitable internet connection
operation
is required:
-
-
These specifications do not provide an absolute guarantee of flawless operation.
High error rates in the transmission, reception fluctuations, or connection dro-
pouts can have an adverse effect on Fronius Datamanager 2.0's online operation.
Fronius recommends on-site testing to ensure that the connections meet the
minimum requirements.
For operation with an antenna extension.
If you want to connect your inverter(s) to the internet using WLAN, we recom-
mend the following approach:
-
-
Since the Fronius Datamanager 2.0 acts as a datalogger, no other datalogger may
be present in the Fronius Solar Net ring.
There must only be one Fronius Datamanager 2.0 for each Fronius Solar Net ring.
The Fronius Datamanager 2.0 must be in secondary mode if installed in Fronius
Galvo and Fronius Symo inverters.
The following DATCOM components must not be operated together with Fronius
Datamanager 2.0 in a Fronius Solar Net ring:
-
-
-
-
-
-
-
To use the Fronius Datamanager 2.0
-
-
The Fronius Datamanager 2.0 plug-in card and the Fronius Com Card must not
be used together in one inverter.
Inverter soft- Fronius Datamanager 2.0 requires the following inverter software versions for its
ware required operation:
Inverter
Fronius IG 15–60
10
For cabled internet solutions, Fronius recommends a download speed of at
least 512 kbit/s and an upload speed of
at least 256 kbit/s.
For solutions with mobile internet services, Fronius recommends a minimum
transmission standard of 3G with reliable signal strength.
Test your signal strength in the exact position where the inverter is to be in-
stalled and make sure the Datamanager 2.0 card is activated.
Connect to the WLAN network using a smartphone, laptop, or tablet, and
test the connection.
The free website "www.speedtest.net" can be used to check whether the con-
nection meets our recommended download speed of at least 512 kbit/s and
an upload speed of 256 kbit/s.
Fronius Power Control Card/Box
Fronius Modbus Card
Fronius Datalogger Web
Fronius Personal Display DL Box
Fronius Datalogger easy/pro
Fronius Datamanager
Fronius Datamanager 2.0 Box
the plug-in card must be installed in an inverter,
or
there must be a Fronius Datamanager Box 2.0 in the Fronius Solar Net ring.
required software version according to display
(MainControl)
V2.9.4 or higher