iTag
Specification/Setup/Operation
Scan To PC
The only difference to Scan To PC is how you enter the information into the MFP. You still need the Scan
File Utility to scan from a Kyocera MFP.
To configure Scan To PC open Device Manager by Clicking the Start Button - > Kyocera -> Device Manager
-> KYOcapture Device Manager.
1. Highlight the desired device, in the example below I highlighted the LAB-KM5035.
Copyright © 2005~2007 Kyocera Mita America, Inc
Version 8.0
All Rights Reserved
Page 84
.