Kyocera KM-C2520 Set Up And Operation Manual page 60

iTag
How to Enable the MFP Auto Color Scan for Gray2Mono Support
The process component Gray2Mono, can be added to the iTag workflow from the iTag Configuration Utility
Wizard as described in the Configuring the Gray2Mono Process Component instructions on page 33 of this
document. In addition, it is still necessary to configure the MFP Color Setting as follows:
From the MFP Operation panel select:
1. Press the *System Menu/Counter button on the operation panel of the MFP. This will display the
System Menu / Counter menu in the LCD.
2. Select the Scanner Default setting button.
System Menu / Counter
System Menu
Copy
Default >
Scanner
Default >
Machine
Default >
3. Using the numeric keys, enter the code 6 4 8 2
Enter the administrator number
Copyright © 2005~2007 Kyocera Mita America, Inc
All Rights Reserved
.
Printer
Default >
Document
Management >
Specification/Setup/Operation
Version 8.0
Page 59