iTag
Scan To E-Mail
To configure Scan To PC open Device Manager by Clicking the Start Button - > Kyocera -> Device Manager
-> KYOcapture Device Manager.
1. Highlight the desired device. In the example below I highlighted the LAB-KM5035. Select the Device
Tables Tab and then the Common Book Tab.
2. As we did with Scan To PC, we can now do the same with E-Mail Addresses.
Copyright © 2005~2007 Kyocera Mita America, Inc
All Rights Reserved
.
Specification/Setup/Operation
Version 8.0
Page 90