Network (Tcp/Ip) Settings - Kyocera KM-2050 Basic Operation Manual

Network (TCP/IP) Settings

Register the IP address of this machine.
Notes
•
•
1
Press the Printer key.
2 Press the
3
Press the Enter key.
4 Press the
5
Press the Enter key.
6
Press the
The IP address that should be registered here differs depending upon your network
environment. Check with your network administrator before performing this setting.
If you use the following procedure to manually register the IP address, be sure to turn the
DHCP setting Off and the TCP/IP setting On. (For details, refer to Chapter 2 in Advanced
Operation Guide, Network Setting.)
key or the key to select MENU.
key or the key to select Interface.
key or the key to select Network.
Ready
GO
CANCEL
MENU
Menu
Back
Print Status Page
Interface
Interface
Back
Parallel
Network
Preparations
2-15