Setting The Date And Time - Kyocera KM-2050 Basic Operation Manual

Setting the Date and Time

Set the current date and time, time difference from the Greenwich Mean Time (GMT), and summer
time.
1
Press the System Menu/Counter key.
2
Press the
default.
3
Press the Enter key.
4
Use the numeric keys to input the four-digit
management code. The management code at the
factory default setting is 1600 for the 16 ppm model,
2000 for the 20 ppm model, and 2500 for the 25 ppm
model.
Note
The four-digit management code can be changed. (For details, refer to Chapter 3 in Advanced
Operation Guide, Administrator Management Code Change.)
5 If the management code is accepted, the Machine
default screen is displayed.
6
Press the
key or the key to select Machine
key or the key to select Date/Time.
System Menu / Counter:
Job Accounting
Copy default
Machine default
Enter pin code using # key.
Machine default:
End
Auto Casstte SW
Paper Size(1st)
Machine default:
Low power time
Key sound On/Off
Date/Time
Preparations
:
On
:
Auto I
: 15Min.
: On
: 06:33
2-19