Kyocera KM-2050 Basic Operation Manual page 78

Basic Operation
During Output
1 Press the Interrupt key during output. Select
Interrupt mode is displayed.
Note
If the machine has neither print data nor received fax data, Interrupt mode OK [Interrupt
mode] is displayed. Proceed to step 4.
2 Press the
interrupt mode.
Notes
•
•
3 Press the Enter key.
If you have selected Interrupt copy, Interrupt
mode OK [Interrupt mode] is displayed. Proceed to
the next step.
If you have selected Priority:Printer or
Priority:Fax, output of data starts. Proceed to step
5.
4
Set the original for interrupt copying and perform copying.
5 After the interrupt job is complete, press the Interrupt key. The interrupted job resumes.
3-22
key or the key to select the desired
Priority:Printer is displayed when the machine has print data.
Priority:Fax is displayed when the machine has received fax data.
Select Interrupt mode.
Interrupt copy
Priority:Printer
Priority:Fax