Names Of Parts; Main Body - Kyocera KM-2050 Basic Operation Manual

1

Names of Parts

Main Body

9
10
1
2
3
4
5
6
7
8
9
10 Bypass tray extension — Pull this to use when setting A4R paper or larger paper.
11 Slider — Adjust this to fit to the width of paper to be set in the multi-bypass tray.
11
Original cover — Open/close this cover when setting the original on the platen.
Output tray — Finished copies or printouts are stored on this tray. The output tray has a
storage capacity of 250 sheets of standard paper (80 g/m²).
Operation panel — Perform operations from the main body here.
Cassette 1 — This cassette has a storage capacity of 300 sheets of standard paper (80 g/m²).
Cassette 2 (20 ppm model/25 ppm model only) — This cassette has a storage capacity of 300
sheets of standard paper (80 g/m²).
Paper width adjusting tab — Use this tab to adjust the paper width guides to fit to the width of
the paper to be loaded in the cassette.
Paper length adjusting tab — Adjust this tab to adjust the paper length guide to fit to the
length of the paper to be loaded in the cassette.
Left cover handle — Pull this handle up to open the left cover.
Multi-bypass tray — When using small paper or special paper, set the paper here.
1
8 5 7
2
3
4
6
1-1