Auto Clear Function; Automatic Cassette Switching Function - Kyocera KM-2050 Basic Operation Manual

Names of Parts
35 Stop/Clear key — Press this key to stop copying or to change the number of copies. Also
36 Start key and indicator — Press this key to start copying. Copying will start immediately if you
37 Main power indicator — Lights up when the main power switch is turned on ( | ).
†
Notes
•
•
•
•

Auto Clear Function

Once a designated amount of time has passed after copying stops (between 10 and 270 seconds),
the machine will return to the same settings as those after warm-up. Copies can continually be
made using the same settings (copy mode, number of copies, and exposure mode) if the next batch
of copying is started before the auto clear function is activated.
Note
For setting the time that passes before the auto clear function is activated, refer to Chapter 3 in
Advanced Operation Guide, Auto Clear Time.

Automatic Cassette Switching Function

If multiple cassettes contain the same size paper and the paper in one cassette runs out during
copying, the automatic cassette switching function will switch paper feed from the empty cassette to
the other cassette that still contains paper.
Notes
•
•
•
1-6
press this key to return to the previous screen from a setting screen for copier functions or the
like.
press this key when the indicator is lit green.
Initial mode (the state that the machine enters at the end of warm-up or when the Reset key is
pressed)
In the factory default setting, paper of the same size as the original is selected automatically
(auto paper selection mode), the copy magnification ratio is set to 100 %, the number of copies
to be made is set to 1 and the image quality is set to the Text + Photo mode.
The settings for the initial mode can be changed using the default setting procedure. (For
details, refer to Chapter 3 in Advanced Operation Guide, Default Setting Mode.)
It is possible to change the cassette selected in the initial mode. (For the 16 ppm model, the
optional paper feeder must be installed. For details, refer to Chapter 3 in Advanced Operation
Guide, Priority Cassette.)
It is possible to change the image quality mode selected in the initial mode. (For details, refer to
Chapter 3 in Advanced Operation Guide, Original Image Quality.)
It is possible to change the default setting of the exposure to Auto exposure mode. (For details,
refer to Chapter 3 in Advanced Operation Guide, Exposure Mode.)
To use this function in the 16 ppm model, the optional paper feeder must be installed.
The automatic cassette switching function can be turned off. (For details, refer to Chapter 3 in
Advanced Operation Guide, Auto Cassette Switching.)
The paper in both cassettes must be set in the same orientation.