Registering The Subnet Mask - Kyocera KM-2050 Basic Operation Manual

14 Use the numeric keys to input the IP address. Enter the
first block of 3 digits of the address in the highlighted
area.
15
Press the # key.
16 Enter the next block of 3 digits of the address in the
highlighted area.
17 Continue the same procedure for the other 2 blocks.
18
Press the Enter key.
Next, set the subnet mask.

Registering the Subnet Mask

To register the subnet mask, continue the procedure from step 18 above.
1 Press the key or the
2
Press the Enter key.
3 Use the same procedure as steps 14 to 17 of IP
address setting to input the address.
key to select Subnet Mask.
IP Address
0 . 0 .
IP Address
10 . 0 .
TCP/IP Setting
DHCP
IP Address
Subnet Mask
Subnet Mask
0 . 0 .
Preparations
0 . 0
0 . 0
0 . 0
2-17