Troubleshooting; Warranty - Kobalt KID 124B-03 Manual

TROUBLESHOOTING

WARNING
Place the direction-of-rotation selector (D) in the center lock position and detach the battery
pack from the drill/driver before performing troubleshooting procedures.
PROBLEM
The drill/driver
does not work.
Bit cannot be
installed.
Motor overheating
The LED work light
flashes rapidly.
The LED work light
flashes slowly.

WARRANTY

For 5 years from the date of purchase, the tool is warranted for the original purchaser to be
free from defects in material and workmanship. This guarantee does not cover damage due
to abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or
expendable parts and accessories expected to become unusable after a reasonable period of
use. This warranty is limited to 90 days for commercial and rental use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at
no charge. This guarantee gives you specific legal rights, and you may also have other rights
that vary from state to state.
POSSIBLE CAUSE
Battery pack is depleted.
Chuck is not released.
Bit does not fit the
chuck.
Ventilation slots are
obstructed.
The tool has stopped
working to protect
internal circuits.
The battery pack charge
is very low.
CORRECTIVE ACTION
Charge the battery pack.
Release the chuck.
Use an appropriate bit or use a suitable
adaptor.
Clean and clear the ventilation slots. Do
not cover ventilation slots with hand during
operation.
Release the trigger switch, wait for the tool
to cool down, then and restart the tool.
Charge the battery pack.
18
Lowe's Home Centers LLC.
Mooresville, NC 28117
Printed in China