Kobalt KID 124B-03 Manual page 49

OPERATING INSTRUCTIONS
10. Auxiliary Handle
This drill/driver is equipped with an auxiliary handle
(G). For ease of operation, you can use the handle
with either the left or the right hand. The handle can
be locked in the two positions shown in Fig 10.
To install the auxiliary handle:
a. Place the direction-of-rotation selector (D) in
the center lock position.
b. Loosen the auxiliary handle (G) by turning the
grip handle counterclockwise.
c. Align the raised portion on the auxiliary handle
with the grooves on gear box of the drill/driver,
then slide the auxiliary handle onto the tool as
shown.
d. Securely tighten the auxiliary handle in place by turning the grip handle clockwise.
To remove the auxiliary handle:
a. Place the direction-of-rotation selector (D) in the center lock position.
b. Loosen the auxiliary handle (G) by turning the grip handle counterclockwise.
c. Remove the auxiliary handle from the tool.
WARNING
• For safety and ease of operation, securely tighten the auxiliary handle by turning the grip
handle clockwise before every use.
10
D
13
Loosen
G
Tighten