Troubleshooting; Warranty - Kobalt 6904 Manual

care anD maintenance
• If abnormal vibration or noise occurs, turn the impact wrench off immediately, and have the
problem corrected before further use.
Using compressed air may be the most effective cleaning method. Always wear safety goggles
when cleaning tools with compressed air.
warninG: Do not allow brake fluids, gasoline, petroleum-based products, penetrating oil, etc.
to come into contact with plastic parts. These substances contain chemicals that can damage,
weaken, or destroy plastic.

trOUBLeShOOtinG

PROBLEM
The tool does not work
Fasteners cannot be loosened The torque exceeded the
5-Year haSSLe-Free warrantY
This impact wrench is warranted to the original purchaser from the original purchase date for
five (5) years subject to the warranty coverage described herein.
This impact wrench is warranted for the original user to be free from defects in material and
workmanship.
If you believe that the impact wrench is defective at any time during the specified warranty period,
simply return the impact wrench along with proof of purchase to the place of purchase for a free
replacement or refund, or call 1-888-3KOBALT for warranty service.
This warranty is void if: defects in materials or workmanship or damages result from repairs
or alterations which have been made or attempted by others or the unauthorized use of
nonconforming parts; the damage is due to normal wear, damage is due to abuse (including
overloading of the tool beyond capacity), improper maintenance, neglect or accident; or the
damage is due to the use of the tool after partial failure or use with improper accessories or
unauthorized repair or alteration.
This warranty excludes blades, bits, bulbs and accessories.
This warranty gives you specific legal rights, and you may also have other rights that vary from
state to state.
POSSIBLE CAUSE
Plugs have not been fully
connected
Incorrect voltage
tool's capacity
10
CORRECTIVE ACTION
Verify that plugs are fully connected
Check that the power source voltage
is 120V
Use a more powerful wrench
Printed in China