Wiring The Transducer Cables - Siemens SITRANS FUS060 Operating Instructions Manual
Ultrasonic flowmeters with profibus pa
Hide thumbs
Also See for SITRANS FUS060:
- Operating instructions manual (52 pages) ,
- Quick start manual (17 pages) ,
- Operating instructions manual (122 pages)
Table of Contents
Advertisement
5.1
Wiring the transducer cables
1. Unscrew the bottom lid from the terminal box.
2. Connect the cables to the transducers according to type of system (1-path or 2-path, see
below).
3. Carefully press the cables into the cable glands until the "snap" function fixes the cable inside
the connection module. Make sure the cables are mounted correctly by smoothly pulling the
cable.
SITRANS FUS060 with PROFIBUS PA
Operating Instructions, 09/2021, A5E02225054-AD
Connecting
5.1 Wiring the transducer cables
33
Advertisement
Table of Contents
