Siemens SITRANS FUS060 Operating Instructions Manual page 81

Rated operating conditions
Electromagnetic compatibility
Emission
Immunity
Medium conditions
Process temperature
Gases/solids
Table 10-5 Design
Design
Transmitter (only as remote version)
Enclosure material
Wall mounting bracket (standard and special)
Weight
Cable glands
Table 10-6 Display and controls
Display and controls
Display
Multi-display: 2 freely selectable values
are displayed simultaneously in two
lines
Operation
Table 10-7 Power supply
Power supply
Supply voltage
Standard version
Ex version
Power failure
Power consumption
SITRANS FUS060 with PROFIBUS PA
Operating Instructions, 09/2021, A5E02225054-AD
For use in industrial environments
EN 55011/CISPR-11
EN 61326-1 (Industry); use of shielded output cables is recommended
The measuring media must be ultrasonic signal compatible. It must be
homogeneous and not two-phased to transfer the acoustic ultrasonic
signals
-200 to +250 °C (-328 to +482 °F) (not directly influenced by medium
temperature)
Influence accuracy of measurement (approx. max. 3 % gases or solids)
Transmitter is connected to the transducers via 3 to 120 m (9.8 to 395
ft) long specially shielded cables (coaxial cable).
For ATEX versions mounted in the Ex area only with 3 m (9.8 ft) long
cables
Die-cast aluminum, painted
Stainless steel (standard: always incl.)
4.4 kg (9.7 lb)
Power supply and outputs: 2 x M25 or 2 x M20 or 2 x ½" NPT
Transducers/sensor: 2/4 x M16 or 2/4 x ½" NPT
LCD, two lines with 16 characters each (backlight)
Volume flow, mass flow, volume, mass, flow velocity, sound velocity, ultrasonic sig‐
nal information, frequency, alarm information
4 infrared keys
Hierarchical menu shown with codes
120 to 230 V AC ± 15% (50/60 Hz) or 19 to 30 V DC/ 21 to 26 V AC
19 to 30 V DC/ 21 to 26 V AC
No effect for at least 1 period (> 20 ms)
Approx. 10 VA / 10 W
Technical specifications
10.1 SITRANS FUS060
81