Transporting The Printer - Epson STYLUS PHOTO 2000P Instruction Manual

5. If the inside of the printer accidentally gets soiled with ink,
wipe it off with a damp cloth.
w
Warning:
Be careful not to touch the gears inside the printer.
c
Caution:
❏ Never use alcohols or thinners to clean the printer; these
❏ Be careful not to get water on the printer mechanism or
❏ Do not use a hard or abrasive brush.
❏ Do not spray the inside of the printer with lubricants;

Transporting the Printer

If you need to transport your printer, carefully prepare and repack
it as described below using the original box (or a similar box that
the printer fits snugly inside) and packing materials.
1. Open the printer cover and make sure that the print head is
in the home (far right) position. If not, turn on the printer and
wait until the print head returns to the home position. Then
turn off the printer and close the printer cover.
c
2. Unplug the power cord from the electrical outlet, then
disconnect the interface cable from the printer.
chemicals can damage the components as well as the case.
electronic components.
unsuitable oils can damage the mechanism. Contact your
dealer or a qualified service person if lubrication is needed.
Caution:
Leave the ink cartridges installed when you transport the
printer. Removing the cartridges during transport can
damage the printer.
8-11
Maintenance